WILDEN® AODD Pumps Can Put the “Pop” in Soda Production



Wilden® Saniflo™ Hygienic™ Series (HS) and FDA AODD Pumps possess a long list of features and benefits that make them ideal for the many liquid-transfer points in the Soft-Drink Production Chain.


What all of these soft-drink production operations have in common is that the manufacturing process must follow strict protocols that cannot be deviated from lest the finished product does not live up to the company’s long-established standards for look, mouthfeel and, most importantly, taste.


Achieving the desired end-product requires carbonated soft drinks to be manufactured according to a strict regimen:


• Common tap water is treated at the production facility so that any impurities that may affect the soft drink’s taste or color are removed. The water’s alkalinity level is also adjusted so that its meets a regulated pH level.


• The treated water is sterilized in order to destroy any bacteria or organic compounds it may still contain. A small amount of chlorine is used to complete the sterilization process.


• After the sterilized water “rests” in a storage tank for a few hours, it is run through an activated-carbon filter that de-chlorinates it. From there, the completely sterilized water is transferred to a dosing station.


• The pre-mixed concentrate – which arrives at the facility in drums and totes – that gives the specific soft drink its color, flavor and sugar content is pumped into the dosing station, where it combines with the water. The amounts of concentrate used at this stage are usually determined by weight, not volume, so the batch tank is placed on a load cell or scale and when a pre-programmed weight – say, 500 pounds (227 kilograms) – is pumped into a tank before the pump turns off.


• This concentrate/water mixture is then moved to a batch tank where it is carefully blended to form the base of the soft drink and then flash pasteurized, which is a process that uses ultraviolet radiation to quickly heat and cool the mixture to ensure that any impurities are removed.


• At a precise temperature, the mixture is passed through a carbonator that adds carbonation to the product at predetermined levels according to the recipe for the soft drink. Generally, juice drinks require far less carbonation than traditional soft drinks or carbonated energy drinks.


• The finished carbonated product is transferred to filling lines where it is injected into bottles and cans of varying volumes at high flow rates. When filled, the containers are sealed with pressure-resistant closures like aluminum caps or twist-off plastic tops.


• The filled cans and bottles (which must also be labeled first) are then packed into cartons or trays before being placed on larger pallets for shipment to distributors, who ensure they find their way to store shelves and into the hands of consumers.


Transfer pumps are required at several junctures along this production and supply chain, and for many years, the pump technology of choice for bottlers and canners of soft drinks was the centrifugal-style pump. For many bottlers and canners, the lower purchase price of centrifugal pumps when compared to the cost of positivedisplacement (PD) pump technologies is the key determinant in their selection.


However, while centrifugal pumps may have a lower up-front cost than PD pumps, they do feature some operational inefficiencies that usually lead to higher ancillary costs during the lifetime of the pump. Upon closer inspection, centrifugal pumps are not self-priming, which hampers their efficiency at startup. Also, they can encounter operating issues when pumping at higher flow rates, especially when handling higher-viscosity liquids like corn syrup, and they are unable to deadhead, which can lead to pump damage if a dry-run condition is encountered.


Centrifugal pumps also have mechanical seals, which can lead to costly leaks, while their mechanical seals generally cost more to repair than some other pump technologies. Seal damage and breakage can be caused by the heat that is generated during dryrun operation. Double mechanical seals are also required for tacky or sticky concentrates, which creates additional costs, increased operational complexity and the need for a water flush for cleaning. Centrifugal pumps are also powered by electrical motors that must be kept dry during operation, which can be problematic when the product being pumped is a liquid.


The Solution Taking all of the potential shortcomings in centrifugal pump operation into consideration, a much better choice for the numerous liquid-handling links in the carbonated soft-drink production chain is the AODD pump. Specifically, the Wilden® Saniflo™ Hygienic™ Series (HS) and Saniflo™ FDA AODD Pumps have been engineered to meet the highest standards for operation in the manufacture of carbonated soft drinks.


Wilden’s HS and FDA AODD pumps possess the versatility to safely and efficiently pump a wide range of viscosities and shear-sensitive products, and are perfect for the corn syrups, phosphoric acids, concentrates and flavorings that play such a major role in the production of soft drinks. The HS model employs a straight-through flow design and both have Triclamp®- style fittings that ensure that desired flow rates are achieved. The wettedpath material is 316L stainless steel with interior-polish levels that range from 0.8 to 1.3 μm (31.5 to 51.2 μin) for ease of cleaning.


Wilden HS pumps are some of the only pumps in the industry to have earned 3A certification for both clean-in-place (CIP) and clean-out-of-place (COP). The free draining flow path, washfriendly clamp bands and CIP capability simplify cleaning, and have enabled Wilden’s HS and FDA AODD pumps to earn certifications from a number of regulatory agencies in the hygienic industry, including 3A, EHEDG, FDA CFR 21.177, USP Class VI and EC 1935/2004. Saniflo FDA models are also available in various materials of construction to meet FDA compliance in diverse applications.


Other features and benefits of HS and FDA AODD pumps, which are available in sizes from 1/2" to 3" (13 mm to 76 mm), include:


·         Availability of multiple sanitary elastomers

·         Seal-less design for superior product containment

·          Delicate, shear-sensitive operation

·          Ability for self-priming or dry-priming operation

·          Damage-free dry-run capability

·          Flow rates from 15 to 245 gpm (57 to 927 L/min)

·          Solids Passage up to 3" (76 mm)

·          Highest energy efficiency on the market


Additionally, Wilden has also designed and developed next-generation diaphragm and air distribution system (ADS) technology that can be used to further optimize the operation and reliability of its HS and FDA pump models.


Metrans Makina is the authorized Wilden® distributor and after-sales service provider in Turkey.


Loading Page